Milling and cleaning machines
Since 2017, we have been the exclusive sales partner of RENSSI® Drain Cleaning Equipment from Finland. The company, based near Turku, specializes in the development and manufacture of milling and pipe cleaning equipment. The partnership has developed primarily through the philosophies of both companies: The customer should be offered materials and machines that are easy to use and of high quality.
The products fit seamlessly into our in-house sewer rehabilitation portfolio.
RCM - Milling & cleaning machines
RENSSI® machines are particularly suitable for cleaning pipes from DN 50 to DN 200 – including plastic pipes. Bends can be negotiated without any problems.
The RCM models are also designed for milling inliners and Point-Liners®: Inlets can be opened and failed renovations removed.
The advantage:
- Very economical due to the comparatively low acquisition costs compared to the very high efficiency
- High rotational speed (up to 3,000 rpm) reduces working time and overcomes almost any obstacle
- If there is too much resistance at an obstacle, the adjustable clutch on the machine drive also spins to prevent the spiral from breaking
- Low maintenance and servicing costs
- Spiral casing prevents direct contact between the rotating spiral and the tube wall, which extends the service life of the spiral
- Thanks to the nylon-sheathed spiral, a camera can be slid directly behind it to monitor the work
- Extensive range of accessories available
- RENSSI® accessories are also compatible with machines from other manufacturers
RCM-10
The RCM-10 is a very lightweight machine and can therefore be transported anywhere.
Chain slingers, brushes and milling heads can be used with the machine depending on requirements.
Product information
- Operation: via Bosch 21-2-RCT drilling machine
- Material: Aluminum
- Operation: Via foot pedal
- Other features: telescopic handle; drilling options; rubber feet for slip resistance and relief of the
floor; lightweight construction
Technical data
Weight | 26.5 kg |
Spiral size | 10 mm |
Spiral length | 10 m |
Max. rotation | 3.000 rpm |
Power | 1.300 W |
Voltage | 110 V und 230 V |
RCM-25
The RCM-25 is the next largest milling and cleaning machine after the RCM-10.
It is equipped with wheels for continued easy transportation.
Two different spiral sizes can be used.
Chain slingers, brushes and milling heads can be used with the machine as required.
Product information:
- Operation: 1.5 kW electric motor with control unit and frequency regulator
- Connection: 230 V socket
- Material: aluminum and stainless steel
- Operation: Via foot pedal
- Further features: Mounted on castors and therefore easy to move; lockable front wheel; particularly
slim and lightweight design
Technical data
Weight | 85 kg (plus 12 kg control unit) |
Spiral size | 10 mm / 12 mm |
Spiral length | 25 m |
Max. rotation | 2.800 rpm |
Power | 1.500 W |
Voltage | 100 V und 230 V |
RCM-36
The RCM-36 is the largest milling and cleaning machine in the series.
It is also equipped with wheels for continued easy transportation.
Two different spiral sizes can be used.
Chain slingers, brushes and milling heads can be used with the machine as required.
Product information:
- Operation: 1.5 kW electric motor with control unit and frequency regulator
- Connection: 230 V socket
- Material: aluminum and stainless steel
- Operation: Via foot pedal
- Further features: Mounted on castors and therefore easy to move; lockable front wheel; particularly
slim and lightweight design
Technical data
Weight | 118 kg (plus 12 kg control unit) |
Spiral size | 10 mm/12 mm |
Spiral length | 36 m |
Max. rotation | 2.800 rpm |
Power | 1.500 W |
Voltage | 110 V und 230 V |
RCM PLUS SERIES
What does the plus stand for? For more spiral length!
Both the RCM-8-PLUS and the RCM-10-PLUS are as handy as the standard RCM-10, but are available with a 25 m spiral.
The PLUS models also have plenty of power with 3,000 revolutions per minute.
Chain slingers, brushes and milling heads can be used with the machine as required.
Product information:
- Operation: via Hikoki DV22V drilling machine
- Material: Aluminum
- Operation: Via foot pedal
- Other features: telescopic handle; drill option; rubber feet for non-slip and floor relief; particularly narrow and lightweight design
Technical data
Weight | 31.5 kg (RCM-8-Plus)/ 36.5 kg (RCM-10-Plus) |
Spiral size | 8 mm/10 mm |
Spiral length | 25 m |
Max. rotation | 3.000 rpm |
Power | 1.300 W |
Voltage | 100 V und 230 V |
Do you have any questions?
More Renssi products
