Renssi
There is a suitable tool for the Renssi machine for all conditions!
A particular advantage over conventional cleaning machines is that the spiral does not come into direct contact with the pipe wall but is covered by a protective hose and rotates within the hose. This prevents the spiral from fraying or twisting in an obstacle. The tools are then mounted on replaceable extensions to significantly increase the service life of the spiral and the machine. The hardened metal tools with attached tines and reinforced weld seams do the rest. If there is too much resistance at an obstacle, the adjustable clutch on the machine drive also spins and the spiral is prevented from breaking. However, with up to 3000 revolutions per minute, the machine can handle almost any challenge.
Chain slingshots
There are chains for all areas of application and all common pipe cleaning machines. We sell chains with and without carbide tips as well as plate chains with carbide tips or simply carbide-coated. They fit the RENSSI system, T-slot connections in 16, 20 and 22 mm and square couplings.
Ask about the prices! A comparison could be worthwhile!
You can also find all products in this category for direct ordering in our store under “Chains”.
Milling tools
The milling tools are used in various areas of the inliner process. For example, they can be used to open blocked inlets or remove collapsed liners. The “excess cutter” can also be used to cut off a closed end.
You can also find all products in this category for direct ordering in our store under “Milling tools”.
Sandpaper
Four sandpapers are attached to the sandpaper holder to allow them to rotate in an open inlet. The sandpaper is used to cleanly grind out the “roughly” opened inlet. There are two different sizes for different pipe diameters.
You can also find all products in this category for direct ordering in our store under “Sandpaper”.
Nylon/steel brushes
Brushes are perfect for cleaning plastic pipes without damaging them. They can also be used to center various tools. They are particularly suitable for cleaning before spraylining. The brushes are made of high-quality nylon or steel, or a combination of both. They are available from DN 50 to DN 200, and with a purchase quantity of 10 pieces, we can also create individual brushes according to your own requirements.
You can also find all products in this category for direct ordering in our store under “Cleaning brushes”.
Cable Carrier
The handy, cost-effective and professional solution for clean storage of the spiral before, during and after use.
The Cable Carrier is available in four different versions: With 10 mm, 8 mm or 6 mm spiral or completely without to use it together with your existing spiral.
You can also find all products in this category for direct ordering in our store under “Cable Carrier”.
Do you have any questions?
More Renssi products
Test the Renssi machines without obligation or order tools for your existing cleaning machine!
Milling and cleaning machine in one, at a low purchase price!
