Easycure
Specially developed heating technology to accelerate the curing times of tube liners.
The EasyCure floor bonder can be operated simply via the domestic power supply and does not require a water supply or similar.
Easy to use
Application range: From DN 30 to DN 150
The smaller the nominal diameter, the faster the pipe heats up to the maximum temperature.
Click here to go to the EasyCure store.
EasyCure can be used in all types of old pipes!
To do this, it can either be pushed into the liner at a later stage (90° bends are no problem) or inverted directly.
Temperatures of up to 60°C can be reached inside the pipe – ideal in combination with our Bodenbender EP renovation resin!
Technical data
EasyCure 15 | EasyCure 30 | EasyCure 50 | |
Abmessungen (mm) | 500 x 560 x 260 | 500 x 560 x 260 | 500 x 560 x 260 |
Kabellänge (m) | 15 | 30 | 50 |
Nennweitenbereich | DN 30 - DN 150 | DN 30 - DN 150 | DN 30 - DN 150 |
Leistung (W) | 975 | 1950 | 3250 |
Gewicht (kg) | 12,5 | 15,5 | 19,5 |
Your efficiency advantage at a glance:
- Automatic heat regulation makes permanent monitoring of curing no longer necessary (measurements still necessary!)
- Consistent heat radiation over the entire distance
- No water connection required and can therefore be used almost anywhere
- Quiet and clean work – especially in living spaces
- Easy to transport due to its low weight, even with a cable length of 50 m
- Several devices can be stacked on top of each other, making them easy to store even in small renovation trailers
EasyCure stopper
for inversion by hand
Available in 3 different sizes:
- DN 50 – 100
- DN 100 – 125
- DN 125 – 150
Locks securely and easily.
Do you have any questions?
Andreas Stentrup
Team Leader Application Technology, Sales & Academy
More inliner products
