Newsletter Anmeldung


Vorname
Nachname
E-Mail-Adresse
Renssi Logo
Since 2017, we are exclusive sales partner of RENSSI® Drain Cleaning Equipment from Finland. The company, based near Turku, specialises in the development and manufacture of milling and pipe cleaning equipment. The partnership developed mainly through the philosophies of both companies: The customer should be offered materials and machines that are easy to handle and at the same time of high quality.

The products thus fit seamlessly into our in-house sewer rehabilitation portfolio.

RCM – Milling & Cleaning Machines

RENSSI® machines are particularly suitable for cleaning pipes from DN 50 to DN 200 – also for plastic pipes. Bends can be overcome without any problems.
The RCM models are also designed for milling inliners and Point-Liner®: Inlets can be opened and rehabilitations that have gone wrong can be removed.

 

The advantage:

  • Very economical due to the comparatively low purchase costs compared to the very high efficiency

  • High rotation speed (up to 3,000 rpm) reduces working time and overcomes almost any obstacle

  • In addition, if there is too much resistance at an obstacle, the adjustable clutch on the drive of the machine rotates to prevent the cable from breaking

  • Low maintenance and servicing costs

  • Cable jacket prevents direct contact between the rotating cable and the tube wall, which prolongs the life of the cable

  • A camera can be slid directly behind to check the work thanks to the nylon-sheathed cable

  • Extensive range of accessories available

  • RENSSI® accessories are also compatible with machines from other manufacturers

RCM-10

 

The RCM-10 is a very lightweight machine and can therefore be transported anywhere.

Chain knockers, brushes and milling heads can be used with the machine depending on the requirements.

 

Product information

  • Operation: via Bosch 21-2-RCT drilling machine
  • Connection: 230 V socket
  • Material: Aluminium
  • Control: Via foot pedal
  • Other features: Telescopic handle; Drilling options; Rubber feet for non-slip properties and floor
    floor; lightweight construction
Renssi-RCM-10 Cleaning machine
Technical data
Weight 26,5 kg
Cable size 10 mm
Cable length 10 m
Max. rotation 3,000 rpm
Power 1,300 W
Voltage 110 V and 230 V
Renssi-RCM-25 cleaning machine

Product information

  • Operation: 1.5 kW electric motor with control unit and frequency regulator
  • Connection: 230 V socket
  • Material: Aluminium and stainless steel
  • Control: Via foot pedal
  • Other features: Mounted o wheels and therefore easy to move; lockable front wheel; particularly
    narrow and light construction

RCM-25

 

The RCM-25 is the next larger milling and cleaning machine after the RCM-10.
It is equipped with wheels for continued easy transport.
Two different cable sizes can be used.

Chain knockers, brushes and milling heads can be used with the machine depending on the requirements.

 

Technical data
Weight 85 kg (plus 12 kg control unit)
Cable size 10 mm / 12 mm
Cable length 25 m
Max. rotation 2,800 rpm
Power 1,500 W
Voltage 110 V and 230 V

RCM-35

The RCM-36 is the largest milling and cleaning machine in the series.
It is also equipped with wheels for continued easy transport.
Two different cable sizes can be used.

Chain knockers, brushes and milling heads can be used with the machine depending on the requirements.

 

Product information

  • Operation: 1.5 kW electric motor with control unit and frequency regulator
  • Connection: 230 V socket
  • Material: Aluminium and stainless steel
  • Control: Via foot pedal
  • Other features: Mounted o wheels and therefore easy to move; lockable front wheel; particularly
    narrow and light construction
Renssi-RCM-36 cleaning machine
Technical data
Weight 118 kg (plus 12 kg control unit)
Cable size 10 mm / 12 mm
Cable length 36 m
Max. rotation 2,800 rpm
Power 1,500 W
Voltage 110 V and 230 V
Test the RENSSI® machines without obligation or contact us for a demonstration on your construction site.